Frequently bought together:
Description
- Half Circle Flush Push Pole Holder
- 4 3/4 in. long
- 2 1/2 in. wide
- 1 3/16 x 3 1/2 in. cut out
- 1/4 in. (4) fastener
- 304 stainless steel/black nylon
2 Reviews
-
Push pole holder
Exact replacement for my 97 boat, however the pivot pin was loose and about to fall out. Had to put it on my vice and smack with a little hammer and set it correctly.
-
Stainless Push Pole Holder open ring
After 26 years I had some rust on the underside and it was time to replace. Thus is the exact part as the original on my 1997 1820 Flatsmaster. Easy swap!!